MitsuRunner

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

===Compiling, uploading and testing the program with the HomeAssistant ESPHome_Builder tool===

Mitsurunner software can also be compiled and uploaded with the //HomeAssistant ESPHome_Builder// tool
There are several ways to do this, one straightforward way is described below. Mitsurunner program created in this way can be uploaded as OTA over the version created with ESPTool without USB upload.

1) Create a new directory **mitsu** in the **HomeAssistant/esphome** directory

2) Copy the files defined in the **mitsu_conf.yaml** directory to the **HomeAssistant/esphome/mitsu** directory

3) Edit the **mitsu_conf.yaml** file by specifying the directory where the files are located.

<<: !include mitsu/platform_wemos.yaml
   packages:
   wifi_base: !include mitsu/secrets.yaml
   dallas_base: !include mitsu/dallas_hub.yaml
   mqtt_base: !include mitsu/mqtt_disabled.yaml
   core_base: !include mitsu/mitsurunner.yaml
   esphome:
   includes:
   - mitsu/constants.h
   - mitsu/state.h

4) Add the **mitsu_conf.yaml** file you edited to the **HomeAssistant/esphome** directory.

5) Open //HomeAssistant ESPHome Builder//, there you will now see "Device" as **mitsu_conf**
Select **edit**, you will see the contents of the "mitsu_conf.yaml" file, the first time the download is done via USB as follows:

6) Compile the code by selecting **install** --> **Manual download** --> a window will open where you can see the progress of the compilation.
If/when the translation goes without errors, save the generated **mitsurunner.bin** file and close the window

7) Select //ESPHome/Device// on the **Mitsurunner/Edit**
    * select **install** again in the upper right corner
    * select **Plug into this computer**
    * select **Open ESPHome Web**
    * select **Connect**
    * select **USB port**
    * select **Establish connection**
    * select **Install**
    * select the previously saved **mitsurunner.bin** file
    * select **Install**

Mitsurunner software is now downloaded and now Mitsurunner should work. By selecting ESPHome/Device** Mitsurunner/logs** you can see the trace_log data sent by Mitsurunner.

You can do the following downloads via OTA connection
ESPHome/Device **Mitsurunner"/Edit** **install** ==> **Wirelessly**

Kirijoitahan aakkoset vallan takaperoisesti ähvästä aahan isoilla kirijaimilla (kuusi kirijainta): Please keep this field empty:

Edit summary

Note: By editing this page you agree to license your content under the following license: Public Domain