Differences

This shows you the differences between two versions of the page.

--- en:opening_outdoor_unit [2023/02/01 11:56] – puu
+++ en:opening_outdoor_unit [2025/01/10 12:59] (current) – kappaleen vaihdot 2001:67c:6ec:203:192:42:116:210
@@ Line 1: / Line 1: @@
 ====== Opening the outdoor unit ======
+**Before anything else turn off the heat pump and then cut off the power from safety switch or from fuse.**
+If you install heat exchanger temperature sensor to the recommended position at *highest pipe*, only steps 1-7 (photos 1 and 2) needed.
-If you install heat exchnager temperature sensor to the highest pipe, only steps 1-7 (photos 1 and 2) needed to execute.
 {{:en:opening_outdoor_unit.png?direct}}
+**Attach Heat Exchanger Temperature Sensor** to the highest pipe with two/three zip ties.
+{{:en:outdoor_unit_highest_pipe_20211101.jpg?400|}}
+**Outdoor Temperature Sensor** should be placed so it is covered, for example behind the outdoor unit
+{{:en:outdoor_temperature_sensor_behind_outdoor_unit.png?400|}}
+**Junction box** can be placed just under the outdoor unit. This gives you easy access.
+{{:en:outdoor_unit_junction_box_20211101.jpg?400|}}